3 monopolar cutting modes: pure cut, blend 1, blend 2, blend 3
Pure cut: cut the tissue cleanly and accurately without coagulation.
blend 1: Use when the cutting speed is slightly slow and a small amount of hemostasis is required.
blend 2: Compared with blend 1, it is used when the cutting speed is slightly slower and a better hemostatic effect is needed.
2 coagulation modes: spray coagulation, forced coagulation, and soft coagulation
forced coagulation: It’s non-contact coagulation. The output threshold voltage is lower than spray coagulation. It’s suitable for coagulation in a small area.
spray coagulation: high-efficiency coagulation without contact surface. The coagulation depth is shallow. The tissue is removed by evaporation. It usually uses a Blade or ball electrode for coagulation.
1 bipolar output mode: Vessel Sealing mode:
Provide exceptional coagulation and transection of vessels up to 7mm in diameter.
Mode |
Max Output Power(W) |
Load impedance (Ω) |
Modulation Frequency (kHz) |
Max Output Voltage (V) |
Crest Factor |
||
Monopolar |
Cut |
Pure Cut |
100 |
500 |
—— |
1300 |
1.8 |
Blend 1 |
100 |
500 |
20 |
1400 |
2.0 |
||
Blend 2 |
100 |
500 |
20 |
1300 |
2.0 |
||
Coag |
Spray |
90 |
500 |
12-24 |
4800 |
6.3 |
|
Forced |
60 |
500 |
25 |
4800 |
6.2 |
||
Bipolar |
Vessel sealing |
60 |
100 |
20 |
700 |
1.9 |
Product Name |
Product Number |
Monopolar Foot-Switch | JBW-200 |
Hand-Switch Pencil, Disposable | HX-(B1)S |
Patient Return Electrode Rods (10mm) With Cable, Reusable | 38813 |
5mm ,37cm Length Laparoscopic Instrument Straight Tip | SM1150 |
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers.